Horizontal beam displacement:26.8'' / 68cmVertical displacement above floor:23.6-94.5'' / 59.94-240.03cmTilt:-90deg. ± 30deg.Pan:-180deg. ± 90deg.Standard floor height:9.4' / 2.86mPower supply:230V / 24V max. 140W (Current transformer for 110V available on demand and with an extra charge)Standard lifting capacity:19.8lbs ± 4.4lbs / 8.98kg ± 1.99kg (without additional counter weight)Weight:503lbs / 228.15kg・Can only be operated manually via a wired remote control・Movements cannot be programmed・Conceived as individual device and manual operating・Can only be operated on site via a wire・Positioning accuracy of camera or sensor ca. 3 mm・4 motorized movements enabled: Vertically Horizontally Tilting of head Tipping of head・Standard stand operating at 230V. An additional transformer also allows operating at 110V・Especially convenient for stationary application needs・When shifting the height the weight compensation of the camera and the beam occurs through a counterweight inside the shaft. Heavier or lighter cameras have thus to be compensated by further counterweights・This stand being very sturdy cameras or sensors can be positioned on higher heights or further away from the shaftThe Foba AROBE M DSS ALPHA Motorized Studio Standard Stand is used when high precision but not quite as high as the one of an industrial robot is needed. The cabled remote control makes this stand the ideal tool for measuring or shooting in closed or inaccessible quarters. Four 24V motors allow all necessary movements.